*******************************************************

Here are the step-by-step instructions for applying iron-on trim:

1. Preheat Iron: Set your iron to the Cotton Setting. Ensure that the steam function is turned off as steam is not needed for this process.

2. Prepare Fabric and Trim: Place your fabric on a flat, heat-resistant surface. Position the iron-on trim with the adhesive side facing down onto the fabric. Make sure the trim is aligned correctly according to your design.

3. Initial Pressing: Cover trim with cloth to prevent discoloration. Press the iron straight down onto the trim and fabric for approximately 10-15 seconds. This initial pressing will anchor the fabric and adhesive together securely.

4. Ironing: After the initial press, proceed to iron the rest of your trim using a back-and-forth motion until you have covered the entire area. Apply consistent pressure to ensure proper adhesion.

5. Second Pressing: Once the entire trim is ironed onto the fabric, turn the fused fabric and trim over. Press the iron onto the backside of the fabric for an additional 15-20 seconds. This...