Connects your internal Mini-SAS Data Cable to a RAID or PCI Controller with an SFF-8087 port to 4 discrete SATA Drives. Mini-SAS Male (SFF-8087) 36Pin to 4 SATA 7Pin female cable multi-lane. Please note: this cable cannot work with SAS Driver. Data transfer rate up to 6Gbps per channel for fast data access. Provides steady internal connectivity between a serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector, allowing you to connect four SATA drives to an SAS controller. This is a Forward Breakout cable, meaning that it is intended to connect to a host/controller on the SAS end and to drives on the SATA end. Novice or pro installers can both benefit from the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs. Cable length - 3.3 ft. Provides sufficient length for internal cable management. Unlike Parallel ATA, this cable has slim ribbons to minimize airflow impact in a computer case. Flexibly designed with acetate cloth tape over slim ribbon cables to protect from strain and rigidity. Woven mesh sheath covers half of the cable for easy routing. Easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection. Organized with P1 to P4 labels for your clear and quick identification after installation. SFF-8087 compatible with popular RAID cars such as 3Ware 9650SE-8LPML RAID, Adaptec ASR-5805/512MB SAS RAID / 2258200-R 5405 RAID / 2258500-R 51645 RAID, Dell PERC H700 Raid / PERC H200, Dell PowerEdge 8-port SAS SATA Controller / PERC H310, HighPoint RocketRAID 2720 / RocketRAID 620 / RocketRAID 4520 / RocketRAID 4522, LSI Logic SAS9211-8I HBA Card, StarTech.com PCI Express RAID, Syba 4-Port RAID HyperDuo / PCI Express SATA II 4 x Ports RAID, Supermicro AOC-SAS2LP-MV8 8-Channel SAS/SATA.