Name: Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold
SKU: 309756448524877828
Availability: InStock

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {1}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {2}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {3}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {4}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {5}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {6}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {7}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {8}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {9}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {10}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {11}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {12}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {13}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {14}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {15}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {16}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {17}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold {18}

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold

6 Commentaires

$46.00 ~~$59.80~~

Handmade 8 inch Geode Agate Tray 2-Part Silicone Mold

Disponibilité:

En stock

Ajouter au panier

Livraison estimée:Jan 09 - Jan 16
Expédition et retours gratuits: Free Shipping for all orders. Free Return

Paiement sécurisé garanti

Description
Information
Commentaires

Geode Agate Tray 2-Part Silicone Mold by Crystal Resin Art This listing is for one handmade Geode Agate Tray 2-Part Silicone Mold that you can use for Epoxy Resin casting.** This is a 2-Part Silicone Mold, made for top-up pours, that consists of a round, flat base, and a removable “river” insert. The bottom of the mold has a textured finish. To work with this mold, you pour resin into the main pockets first, and when that resin has cured, you remove the river insert part of the mold, and then fill the river area with resin. There is also room inside the mold to add a top coat, once the river area has cured. This Mold uses approximately 15.50 ounces of resin, if you add a top coat. NOTE: The finished resin pieces are shown as a sample of what can be created using this mold. The samples are not included. Our YouTube Channel (@CrystalResinArt) has Video Tutorials, showing how to use this Mold. Mold Features: • Made from Platinum Cure Food Grade Silicone • Made for Top-up pours • Removable river insert Color: Translucent White Base and Yellow River Insert Approximate Measurements: Mold Base: 8.25” W x .72” H River Insert: 8” W x .28” H IMPORTANT NOTES: • This mold is handmade to order. Please allow 5 business days for production. • Because this is a handmade mold, it might have small imperfections. ** While Silicone Molds can sometimes be used with other casting materials, we have only used these with high quality Epoxy Resin. ----------------------------- Helpful tips for working with Silicone Molds • Never use a torch or open flame with Silicone Molds. • Never use anything sharp or abrasive, inside the mold. • Always use high quality Epoxy Resin products and follow the mixing and pouring directions for that product. • Keep your mold clean - Keep dust away by storing it in a plastic bag, and only use tape or warm water to clean it.

1 review for Chaz Kangeroo Hoodies

admin - 30 Nov, 2018

Aliquam fringilla euismod risus ac bibendum. Sed sit amet sem varius ante feugiat lacinia. Nunc ipsum nulla, vulputate ut venenatis vitae, malesuada ut mi. Quisque iaculis, dui congue placerat pretium, augue erat accumsan lacus

* Your Name

* Your Email

* Your Review

Note: HTML is not translated!

* Rating Bad Good