Adhesive Guru AG250 CA Glue & Activator Spray Set is a great solution for quick and strong bonding. Using the CA glue with the Activator reduces curing time to 5–10 seconds and ensures a stronger, more uniform bond. Ideal for carpentry, DIY projects, hobbies, repairs, renovations, school projects, gap-filling, 3D printing, and any project that requires a strong and reliable bond. - A complete set for strong and rapid bonding - The CA glue’s bonding time is reduced to 5–10 seconds when used with the Activator - Works on wood, ceramic, glass, metal, tile, PVC, stone, MDF, porcelain, Kraft paper, laminate, leather, rubber, most plastics, and more. NOT recommended for polyethylene, polypropylene, or non-stick surfaces. - The CA glue has a thick viscosity (1200–1500 cps, similar to honey), making it suitable even for vertical applications - Transparent finish - Suitable for both indoor and outdoor use. Water-resistant once cured, but avoid constant water exposure. - How to Use - The Classical Method: 1) Wear protective gear, including a mask, safety goggles, and gloves. Ensure the surface is clean and dry before application. 2) Apply 2-3 drops of CA glue per 1 square inch of surface. 3) Shake the Activator well and spray it onto the other surface from a distance of 1 inch. 4) Press the pieces together manually for 5-10 seconds. 5) Allow the bond to dry for at least 1 hour before handling. Reaches maximum strength in 24 hours. - How to Use - The Layering Method: It is ideal for filling knots and voids. 1) Wear protective gear and ensure the surface is clean and dry before application. 2) Apply a thin layer of CA Glue and spray the Activator. 3) Wait 10-15 seconds for the adhesive to cure, and repeat the process as needed. - Each CA glue bottle is filled to 2/3 capacity for easier handling and optimal performance - Avoid inhaling directly. Use in a well-ventilated area. Store between +40°F and +75°F in a cool, dry place, away from direct sunlight or heat sources.