Adhesive Guru AG220A Activator Spray (6.75 fl oz) accelerates the curing of CA glue, producing fast, strong, and long-lasting bonds for both DIY enthusiasts and professionals. Its advanced formula ensures even, consistent drying and eliminates the need for clamps or holding devices. - Instantly accelerates CA glue curing—bonds in 5–10 seconds - Compatible with Adhesive Guru, BondXtra, and most CA glues - Fine mist spray for clean, precise application - Ideal for woodworking, repairs, DIY projects, household tasks, school projects, 3D printing, and hobbies like model making, crafts, jewelry making, and other similar works - This spray is NOT an adhesive – for use only with CA glue - Transparent finish - Works on wood, ceramic, glass, metal, tile, PVC, stone, MDF, porcelain, Kraft paper, laminate, leather, rubber, most plastics, and more. NOT recommended for polyethylene, polypropylene, or non-stick surfaces. - Suitable for both indoor and outdoor use - Waterproof once cured, but avoid constant water exposure - How to Use - The Classical Method: 1) Wear protective gear, including a mask, safety goggles, and gloves. Ensure the surface is clean and dry before application. 2) Apply 2-3 drops of CA glue per 1 square inch of surface. 3) Shake the Activator well and spray it onto the other surface from a distance of 1 inch. 4) Press the pieces together manually for 5-10 seconds. 5) Allow the bond to dry for at least 1 hour before handling. Reaches maximum strength in 24 hours. - How to Use - The Layering Method: This method is ideal for filling knots and voids. 1) Wear protective gear, including a mask, safety goggles, and gloves. Ensure the surface is clean and dry before application. 2) Apply a thin layer of CA Glue and spray the Activator. 3) Wait 10-15 seconds for the adhesive to cure, and repeat the process as needed. - Avoid inhaling directly. Use in a well-ventilated area. Store between +40°F and +75°F in a cool, dry place, away from direct sunlight or heat sources.